Using your own router with the Gateway TG1672

Category: 
Internet

Once your plan is set up for your own router, you can connect it by following the instructions below

  1. After connecting to the existing network on your Gateway TG1672, open a web browser and enter 192.168.0.1 into the address bar.
  2. Enter the Gateway user name and password and click OK. The default user name is admin. The default password is password.
  3. Click on the LAN Setup tab on the top of the page, and then click the LAN Settings button on the left side of the screen.
  4. Under NAT, select Bridged from the dropdown, then click Apply.

For further assistance, please refer to your router’s manufacturer or contact its manufacturer.