Suddenlink Calling Features
Selective Call Rejection
Selective Call Rejection screens every incoming call against a customized "do not accept" list of numbers created by the subscriber and rejects those calls on the list. You can choose to reject a list of up to 10 specific phone numbers. When you block a telephone number they will hear “The number you have dialed is not accepting calls from your number at this time” You should use this feature any time you would like to block a specific number from being able to call your home number.
To access Selective Call Rejection service:
Listen for dial tone then press *60. The recorded voice will then tell you how many public or private numbers are currently stored on your "do not accept" list.
| |
To turn the feature on you must first block a number. |
To add the last caller to your "do not accept" list.
Listen for dial tone then press *60 then press #01# . The number you have blocked will be repeated back for verification.
To Activate or Deactivate:
| |
To turn the feature on the customer must first have telephone numbers placed on your “Do Not Accept” list. |
Listen for dial tone then press *60. Dial 3 to turn the feature ON (if it is currently off), or turn the feature OFF (if it is currently on).
To add a new phone number to your "do not accept" list.
Listen for dial tone then press *60. Wait for the automated message to begin then Press #. Dial the number you want to block then Press # again. The number you have blocked will be repeated back for verification.
To remove a number from your "do not accept" list.
Listen for dial tone then press *60
- To remove all entries, press 08*
- To remove individual entries, press 09*
To hear the phone numbers on your "do not accept" list.
Listen for dial tone then press *60 dial 1. After list is read, voice instructions will follow